This handcrafted 3 tier shelving unit is made using quality copper pipe and African Sapele hard wood timber.
We professionally solder every joint making this a strong and solid single piece of furniture ready to be installed in your space.
The African Sapele wood has been sealed with Oil and is Biscuit jointed, routed, sanded and then mounted on a raised floating platform using specialist brass clips.
You can choose from two finishes. The pictures show the copper in a Polished & Lacquered finish that will maintain it's bright copper colour and reflective shine.
A Natural Finish will arrive to you with the same appearance and will then darken over time to a warm, deep brown industrial colour.
DIMENSIONS
Overall measurements -
W: 1200mm
H: 1020mm
D: 250mm
Spacing of shelves (1-2 & 2-3) -
Spacing: 420mm
gap/clearance between shelves (1-2 & 2-3) -
Gap: 360mm
INSTALLATION
Where possible try to install the shelving on a solid masonry wall. For this we recommend to use 2”8’s screws and red plugs using a 5.5mm drill bit to make the fixing holes. For Stud walls (Plasterboard), we recommend you use either an appropriate plasterboard fixing, fix into existing studs/timber batons or install a suitable sheet of plywood within the wall.
CUSTOMISATION
Please contact us if you would like to explore custom options, or discuss measurements and finishes. Please note that custom measurements and requirements will usually cost more.
ADVICE
The appearance of copper, brass and timber finishes may differ from the images attached. However it will be made using the exact same materials and we will make your order as close to the images as possible. Dimensions stated are approximate and suitable tolerances/clearance space around this unit should be considered. We test each initial design we make. However we cannot guarantee what the strength of the piece will be. We advise that the item is not placed under heavy loads and not subject to high forms of stress.